TempAlert Support

Search articles and videos to get the most out of your TempAlert Device

Reset Search
Search
 

Article

How to Change Batteries in your ZPoint Wireless Sensor

« Go Back

Information

 
Details

The batteries in your Point Wireless Sensor will last from 2 to 5 years, depending on use. The main factors affecting the life of your battery are report interval and signal strength.

*Note: We recommend that you use AA Energizer Ultimate Lithium batteries; other brands have a noticeably shorter life span. Standard alkaline cell batteries may be used, but they do not perform well under cold conditions.

Steps

  1. Turn the unit over and locate the screw.


    User-added image

  2. Using a Phillips head screwdriver, unscrew the cover.


    User-added image

  3. Remove the old batteries.
  4. Replace the batteries with two Energizer Ultimate Lithium AA batteries.
  5. To turn on the device, press and release the On/Off button.

*Notes:

  • Batteries draining much quicker than expected likely points to a hardware issue. Please contact us if you are having this problem.
  • Standard alkaline cells can be used, but they will not perform well in cold conditions.
  • Alternate battery types will have a noticeably shorter lifespan.

 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255

 

Browse By Product
Still Need help?
Submit a Ticket